1 Kings 7:30-41
New American Standard Bible
Chapter 7
30Now each stand had four bronze wheels with bronze axles, and its four feet had supports; beneath the basin were cast supports with wreaths at each side. 31And its opening inside the crown at the top was a cubit, and its opening was round like the design of a pedestal, a cubit and a half; and on its opening also there were engravings, and their borders were square, not round. 32The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half. 33The workmanship of the wheels was like the workmanship of a chariot wheel. Their axles, their rims, their spokes, and their hubs were all cast. 34Now there were four supports at the four corners of each stand; its supports were part of the stand itself. 35And on the top of the stand there was a circular form half a cubit high, and on the top of the stand its stays and its borders were part of it. 36And he engraved on the plates of its stays and on its borders cherubim, lions, and palm trees, as there was clear space on each, with wreaths all around. 37He made the ten stands like this: all of them had the same casting, same measure, and same form.
38And he made ten basins of bronze, each holding forty baths; each basin was four cubits, and on each of the ten stands was one basin.
39Then he placed the stands, five on the right side of the house and five on the left side of the house; and he set the Sea of cast metal on the right side of the house eastward toward the south.
40Now Hiram made the basins and the shovels and the bowls. So Hiram finished doing all the work which he performed for King Solomon in the house of the Lord:
41the two pillars and the two bowls of the capitals which were on the top of the two pillars, and the two lattices to cover the two bowls of the capitals which were on the top of the pillars;
King James Version
Chapter 7
30And every base had four brasen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition. 31And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round. 32And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit. 33And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten. 34And there were four undersetters to the four corners of one base: and the undersetters were of the very base itself. 35And in the top of the base was there a round compass of half a cubit high: and on the top of the base the ledges thereof and the borders thereof were of the same. 36For on the plates of the ledges thereof, and on the borders thereof, he graved cherubims, lions, and palm trees, according to the proportion of every one, and additions round about. 37After this manner he made the ten bases: all of them had one casting, one measure, and one size. 38Then made he ten lavers of brass: one laver contained forty baths: and every laver was four cubits: and upon every one of the ten bases one laver. 39And he put five bases on the right side of the house, and five on the left side of the house: and he set the sea on the right side of the house eastward over against the south. 40And Hiram made the lavers, and the shovels, and the basons. So Hiram made an end of doing all the work that he made king Solomon for the house of the LORD: 41The two pillars, and the two bowls of the chapiters that were on the top of the two pillars; and the two networks, to cover the two bowls of the chapiters which were upon the top of the pillars;Christian Standard Bible
Chapter 7
30Each cart had four bronze wheels with bronze axles. Underneath the four corners of the basin were cast supports, each next to a wreath. 31And the water cart's opening inside the crown on top was eighteen inches wide. The opening was round, made as a pedestal twenty-seven inches wide. On it were carvings, but their frames were square, not round. 32There were four wheels under the frames, and the wheel axles were part of the water cart; each wheel was twenty-seven inches tall. 33The wheels' design was similar to that of chariot wheels: their axles, rims, spokes, and hubs were all of cast metal. 34Four supports were at the four corners of each water cart; each support was one piece with the water cart. 35At the top of the cart was a band nine inches high encircling it; also, at the top of the cart, its braces and its frames were one piece with it. 36He engraved cherubim, lions, and palm trees on the plates of its braces and on its frames, wherever each had space, with encircling wreaths. 37In this way he made the ten water carts using the same casting, dimensions, and shape for all of them.
38Then he made ten bronze basins--each basin held 220 gallons and each was six feet wide--one basin for each of the ten water carts.
39He set five water carts on the right side of the temple and five on the left side. He put the basin near the right side of the temple toward the southeast.
40Then Hiram made the basins, the shovels, and the sprinkling basins. So Hiram finished all the work that he was doing for King Solomon on the Lord's temple:
41two pillars; bowls for the capitals that were on top of the two pillars; the two gratings for covering both bowls of the capitals that were on top of the pillars;
New Living Translation
Chapter 7
30Each of these carts had four bronze wheels and bronze axles. There were supporting posts for the bronze basins at the corners of the carts; these supports were decorated on each side with carvings of wreaths. 31The top of each cart had a rounded frame for the basin. It projected 1 1/2 feet above the cart’s top like a round pedestal, and its opening was 2 1/4 feet across; it was decorated on the outside with carvings of wreaths. The panels of the carts were square, not round. 32Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2 1/4 feet in diameter 33and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze.
34There were handles at each of the four corners of the carts, and these, too, were cast as one unit with the cart.
35Around the top of each cart was a rim nine inches wide. The corner supports and side panels were cast as one unit with the cart.
36Carvings of cherubim, lions, and palm trees decorated the panels and corner supports wherever there was room, and there were wreaths all around.
37All ten water carts were the same size and were made alike, for each was cast from the same mold.
38Huram also made ten smaller bronze basins, one for each cart. Each basin was six feet across and could hold 220 gallons of water.
39He set five water carts on the south side of the Temple and five on the north side. The great bronze basin called the Sea was placed near the southeast corner of the Temple.
English Standard Version
Chapter 7
30Moreover, each stand had four bronze wheels and axles of bronze, and at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. 31Its opening was within a crown that projected upward one cubit. Its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings, and its panels were square, not round. 32And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half. 33The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast. 34There were four supports at the four corners of each stand. The supports were of one piece with the stands. 35And on the top of the stand there was a round band half a cubit high; and on the top of the stand its stays and its panels were of one piece with it. 36And on the surfaces of its stays and on its panels, he carved cherubim, lions, and palm trees, according to the space of each, with wreaths all around. 37After this manner he made the ten stands. All of them were cast alike, of the same measure and the same form.
38And he made ten basins of bronze. Each basin held forty baths, each basin measured four cubits, and there was a basin for each of the ten stands.
39And he set the stands, five on the south side of the house, and five on the north side of the house. And he set the sea at the southeast corner of the house.
40Hiram also made the pots, the shovels, and the basins. So Hiram finished all the work that he did for King Solomon on the house of the LORD:
41the two pillars, the two bowls of the capitals that were on the tops of the pillars, and the two latticeworks to cover the two bowls of the capitals that were on the tops of the pillars;
New International Version
Chapter 7
30Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. 31On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round. 32The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half. 33The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
34Each stand had four handles, one on each corner, projecting from the stand.
35At the top of the stand there was a circular band half a cubit deep. The supports and panels were attached to the top of the stand.
36He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around.
37This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.
New King James Version
Chapter 7
30Every cart had four bronze wheels and axles of bronze, and its four feet had supports. Under the laver were supports of cast bronze beside each wreath. 31Its opening inside the crown at the top was one cubit in diameter; and the opening was round, shaped like a pedestal, one and a half cubits in outside diameter; and also on the opening were engravings, but the panels were square, not round. 32Under the panels were the four wheels, and the axles of the wheels were joined to the cart. The height of a wheel was one and a half cubits. 33The workmanship of the wheels was like the workmanship of a chariot wheel; their axle pins, their rims, their spokes, and their hubs were all of cast bronze. 34And there were four supports at the four corners of each cart; its supports were part of the cart itself. 35On the top of the cart, at the height of half a cubit, it was perfectly round. And on the top of the cart, its flanges and its panels were of the same casting. 36On the plates of its flanges and on its panels he engraved cherubim, lions, and palm trees, wherever there was a clear space on each, with wreaths all around. 37Thus he made the ten carts. All of them were of the same mold, one measure, and one shape.
38Then he made ten lavers of bronze; each laver contained forty baths, and each laver was four cubits. On each of the ten carts was a laver.
39And he put five carts on the right side of the house, and five on the left side of the house. He set the Sea on the right side of the house, toward the southeast.
40Huram made the lavers and the shovels and the bowls. So Huram finished doing all the work that he was to do for King Solomon for the house of the Lord:
41the two pillars, the two bowl-shaped capitals that were on top of the two pillars; the two networks covering the two bowl-shaped capitals which were on top of the pillars;
