Exodus 36:20-29
New American Standard Bible
Chapter 36
20Then he made the boards for the tabernacle of acacia wood, standing upright. 21Ten cubits was the length of each board, and one and a half cubits the width of each board. 22There were two tenons for each board, fitted to one another; he did this to all the boards of the tabernacle. 23So he made the boards for the tabernacle: twenty boards for the south side; 24and he made forty bases of silver under the twenty boards; two bases under one board for its two tenons, and two bases under another board for its two tenons. 25Then for the second side of the tabernacle, on the north side, he made twenty boards, 26and their forty bases of silver; two bases under one board, and two bases under another board. 27And for the back of the tabernacle, to the west, he made six boards. 28He made two boards for the corners of the tabernacle at the back. 29They were double beneath, and together they were complete to its top, to the first ring; he did this with both of them for the two corners.King James Version
Chapter 36
20And he made boards for the tabernacle of shittim wood, standing up. 21The length of a board was ten cubits, and the breadth of a board one cubit and a half. 22One board had two tenons, equally distant one from another: thus did he make for all the boards of the tabernacle. 23And he made boards for the tabernacle; twenty boards for the south side southward: 24And forty sockets of silver he made under the twenty boards; two sockets under one board for his two tenons, and two sockets under another board for his two tenons. 25And for the other side of the tabernacle, which is toward the north corner, he made twenty boards, 26And their forty sockets of silver; two sockets under one board, and two sockets under another board. 27And for the sides of the tabernacle westward he made six boards. 28And two boards made he for the corners of the tabernacle in the two sides. 29And they were coupled beneath, and coupled together at the head thereof, to one ring: thus he did to both of them in both the corners.Christian Standard Bible
Chapter 36
20He made upright supports of acacia wood for the tabernacle. 21Each support was fifteen feet long and twenty-seven inches wide. 22Each support had two tenons for joining one to another. He did the same for all the supports of the tabernacle. 23He made supports for the tabernacle as follows: twenty for the south side, 24and he made forty silver bases to put under the twenty supports, two bases under the first support for its two tenons, and two bases under each of the following supports for their two tenons; 25for the second side of the tabernacle, the north side, he made twenty supports, 26with their forty silver bases, two bases under the first support and two bases under each of the following ones; 27and for the back of the tabernacle, on the west side, he made six supports. 28He also made two additional supports for the two back corners of the tabernacle. 29They were paired at the bottom and joined together at the top in a single ring. This is what he did with both of them for the two corners.New Living Translation
Chapter 36
20For the framework of the Tabernacle, Bezalel constructed frames of acacia wood. 21Each frame was 15 feet high and 27 inches wide, 22with two pegs under each frame. All the frames were identical. 23He made twenty of these frames to support the curtains on the south side of the Tabernacle. 24He also made forty silver bases — two bases under each frame, with the pegs fitting securely into the bases. 25For the north side of the Tabernacle, he made another twenty frames, 26with their forty silver bases, two bases under each frame. 27He made six frames for the rear — the west side of the Tabernacle — 28along with two additional frames to reinforce the rear corners of the Tabernacle. 29These corner frames were matched at the bottom and firmly attached at the top with a single ring, forming a single corner unit. Both of these corner units were made the same way.English Standard Version
Chapter 36
20Then he made the upright frames for the tabernacle of acacia wood. 21Ten cubits was the length of a frame, and a cubit and a half the breadth of each frame. 22Each frame had two tenons for fitting together. He did this for all the frames of the tabernacle. 23The frames for the tabernacle he made thus: twenty frames for the south side. 24And he made forty bases of silver under the twenty frames, two bases under one frame for its two tenons, and two bases under the next frame for its two tenons. 25For the second side of the tabernacle, on the north side, he made twenty frames 26and their forty bases of silver, two bases under one frame and two bases under the next frame. 27For the rear of the tabernacle westward he made six frames. 28He made two frames for corners of the tabernacle in the rear. 29And they were separate beneath but joined at the top, at the first ring. He made two of them this way for the two corners.New International Version
Chapter 36
20They made upright frames of acacia wood for the tabernacle. 21Each frame was ten cubits long and a cubit and a half wide, 22with two projections set parallel to each other. They made all the frames of the tabernacle in this way. 23They made twenty frames for the south side of the tabernacle 24and made forty silver bases to go under them—two bases for each frame, one under each projection. 25For the other side, the north side of the tabernacle, they made twenty frames 26and forty silver bases—two under each frame. 27They made six frames for the far end, that is, the west end of the tabernacle, 28and two frames were made for the corners of the tabernacle at the far end. 29At these two corners the frames were double from the bottom all the way to the top and fitted into a single ring; both were made alike.New King James Version
